ACCESSORIES FOR LYOPHILISATION IN FLASKS
Coloumn Manifolds
Column manifolds are suitable for lyophilising small amounts of liquid in flasks. It is supplied with
quick seal valves, rubber adaptors, cone connectors, round bottom flasks(max 500ml) and a gasket.
MOC – SS 304
| PRODUCT CODE | ITEM | PORTS |
| FM 0080 | 8 - port SS Column Manifold | 8 |
| FM 0024 | 24 - port SS Column Manifold | 24 |
DRUM MANIFOLDS
Drum manifolds are preferred where simultaneous lyophilisation of liquids in flasks and trays is required. Trays
and beakers for bulk drying can be placed inside the drum. It is supplied with quick seal valves, rubber adaptors,
cone connectors, round bottom flasks(max 500ml) and gaskets. The material of construction is SS 304/Acrylic.
- 8 - Port Acrylic Drum - Economical, Transparent, Lightweight SS Drum Manifold
- SS Drum Manifold - High chemical resistance, longer lifespan
| PRODUCT CODE | ITEM | PORTS |
| FM 0081 | 8 - port SS Column Manifold | 8 |
| FM 0008 | 24 - port SS Column Manifold | 8 |
| FM 0010 | 10 - Port SS Drum Manifold | 10 |
| FM 0012 | 12 - Port SS Drum Manifold | 12 |
| FM 0016 | 16 - Port SS Drum Manifold | 16 |
ACCESSORIES FOR LYOPHILISATION IN TRAYS
BULK RACK ASSEMBLY
Bulk rack assembly is an appropriate accessory for freeze-drying of liquids, semi-solids and solids in trays. It comes with 2/3/5 SS racks fitting SS trays, an acrylic jar for closure and a gasket. MOC – SS 304.
| PRODUCT CODE | ITEM | PORTS |
| BA 02200 | 2 trays Bulk rack assembly | 2 |
| BA 03200 | 3 trays Bulk rack assembly | 3 |
| BA 05200 | 5 trays Bulk rack assembly | 5 |
ACCESSORIES FOR LYOPHILISATION IN VIALS
VIAL STOPPERING MECHANISM
Vial stoppering is an ideal accessory for samples that require freeze dying in vials followed by sealing under a vacuum.
This accessory can be also used for bulk drying. The item comes with 1/2/3 movable aluminium shelves, two semicircular
steel trays per shelf and a vacuum chamber. The stoppering mechanism is manual.
| PRODUCT CODE | ITEM | Vial- 2ml | Vial- 5ml | Vial- 10ml |
| VS 0012 | Vialstoppering -1shelf, 2 trays | 80 no | 40 no | 20 no |
| VS 0024 | Vialstoppering -2 shelf, 4 trays | 160 no | 80 no | 40 no |
| VS 0036 | Vialstoppering -3 shelf, 6 trays | 240 no | 120 no | 60 no |
INTEGRATED ACRYLIC DRUM MANIFOLD
The accessory is designed as an integration of a flask manifold and bulk tray with a Vial stoppering mechanism focused
on multiple applications in one manifold for easy use for customers. The system consists of standard 8 ports for the flask,
with 3 – 5 shelves for vials (2ml, 5ml 10ml) and bulk samples.
Tray dimension Dia 200 ; Height 30
| PRODUCT CODE | PORTS | SHELVES | SPACE BET SHELVES | Vial- 2ml | Vial- 5ml | Vial- 10ml |
| FVB 083 | 8 | 3 | 68 mm | 690 no | 360 no | 195 no |
| FVB 084 | 8 | 4 | 50 mm | 920 no | 480 no | 260 no |
HEATER CONTROL UNIT FOR BULK RACK & VIAL STOPPERING
A heater Control Unit (HCU) is a free-standing power supply unit designed to deliver thermostatically controlled lowvoltage power supply to the heater pads attached under each wired tray in a bulk rack assembly/vial stoppering
mechanism. The heat energy produced by the heater pads enhances the drying rate. The complete set comes with the
heater control box, bulk rack assembly / vial stoppering mechanism.
| PRODUCT CODE | ITEM | POWER |
| BHCU 03300 | HCU with 3 trays Bulk rack assembly | 22 W/shelf |
| BHCU 04300 | HCU with 4 trays Bulk rack assembly | |
| BHCU 05300 | HCU with 5 trays Bulk rack assembly | |
| VHCU 0036 | HCU with 3 shelf vialstoppering mechanism | |
| VHCU 0048 | HCU with 4 shelf vialstoppering mechanism |
ACCESSORIES FOR LYOPHILISATION IN AMPOULES
SPIN FREEZER - FREEZING & PRIMARY DRYING
Spin Freezer was devised to aim for both freezing and primary drying of products in ampoules. The centrifugal action
with freezing will expedite the drying process in ampoules by freezing samples to a thin layer on one side of the
ampoules. The freezing of ampoules is then followed by primary drying and secondary drying. Sublimation of ice takes
place under a vacuum during the primary drying stage and is followed by the secondary drying stage in the secondary
drying manifolds.
The spin freeze set includes a control box with a base plate, an acrylic chamber with a gasket, and 5 sets of interchangeable aluminium carriers, each designed to handle different-sized ampoules.
The spin freeze set includes a control box with a base plate, an acrylic chamber with a gasket, and 5 sets of interchangeable aluminium carriers, each designed to handle different-sized ampoules.
| Ampoules(ml) | 0.5 | 1 | 2 | 5 | 10 |
| Capacity (no) | 96 | 80 | 36 | 24 | 12 |
| PRODUCT CODE | ITEM | RPM | POWER |
| ADSP 096 | Spin Freezer with 5 interchangeable carries | 500 | 220V, 50Hz, 1ph |
SECONDARY DRYING MANIFOLDS
The Secondary drying manifolds are used for the secondary drying stage after the primary drying of ampoules. In the
secondary drying, the lyophilization cycle of ampoules gets completed and the ampoules are sealed under a vacuum with
the help of a sealing torch.
The spin freeze set includes a control box with a base plate, an acrylic chamber with a
gasket, and 5 sets of interchangeable aluminium carriers, each designed to handle
different-sized ampoules.
The Secondary drying manifold set includes
The Secondary drying manifold set includes
- ADSM 024/048 - 24/48 port manifold with nipple adapters to hold the ampoules, a clamp, and an acrylic plate with a gasket.
- ADSM 096. - 2 x 48 port manifolds with nipple adapters, manifolds connecting pipe, 3 clamps, and an acrylic plate with a gasket.
| PRODUCT CODE | ITEM | CAPACITY |
| ADSM 024 | 24 - Port Secondary Drying Manifold | 24 ampoules |
| ADSM 048 | 48 - Port Secondary Drying Manifold | 48 ampoules |
| ADSM 096 | 96 - Port Secondary Drying Manifold | 96 ampoules |
