TYPE | DESCRIPTION | UNIT | TURRET-STP 63 | |
MAIN SPINDLE CAPACITY (OPERATION-I) | SWING OVER - AXIS COVER | mm | 260 | |
| BETWEEN CENTER | mm | 350** | |
| MAXIMUM TURNING LENGTH | mm | 290** | |
| MAXIMUM TURNING DIA | mm | 220 | |
| MAXIMUM BAR CAPACITY-DIA | mm | 42* | 51* |
MAIN SPINDLE | CHUCK SIZE | mm | 169 | 210 |
| COLLET SIZE | type | 42/A2-5 | 60/A2-6 |
| SPINDLE BORE | mm | 58 | 63 |
| SPINDLE NOSE DIN 55026 | type | A2-5LB | A2-6 |
| SPINDLE SPEED | rpm | 50-4000 | |
SUB SPINDLE CAPACITY (OPERATION-II) | SWING OVER - AXIS COVER | mm | 260 | |
| MAXIMUM TURNING LENGTH | mm | 290** | |
| MAXIMUM TURNING DIA | mm | 220 | |
| MAXIMUM BAR CAPACITY-DIA | mm | 42* | |
SUB SPINDLE | CHUCK SIZE | mm | 169 | |
| COLLET | type | 42-A2-5 | |
| SPINDLE BORE | mm | 62 | |
| SPINDLE NOSE DIN 55026 | type | A2-5LB | |
| SPINDLE SPEED | rpm | 50-4000 | |
TRAVEL | X AXIS (X1 / X2) | mm | 135 | |
| Z AXIS (Z1 / Z2) | mm | 460 | |
| SUB SPINDLE | mm | 350 | |
FEED RATE | RAPID TRAVERSE X AXIS (X1 / X2) | mts./min | 20 | |
| RAPID TRAVERSE Z AXIS (Z1 / Z2) | mts./min | 25 | |
| RAPID TRAVERSE - SUB SPINDLE | mts./min | 20 | |
TOOLING | TOOL DISC INDEXING METHOD | type | SERVO MOTOR DRIVE | |
| NO.OF TOOL STATIONS | Nos | 12 | |
| TOOL SHANK SIZE | mm | 20x20 | |
| MAXIMUM TOOL HOLDING DIA. | mm | 32 | |
CNC CONTROLLER | FANUC/MITSUBISHI | type | Oi TF+/ M-80A | |
MOTOR POWER (MAIN SPINDLE) | SPINDLE MOTOR RATED POWER ( CONTINUOUS RATING) | KW | 5.5KW/7.5KW (FANUC/MITSUBISHI) | |
MOTOR POWER (SUB SPINDLE) | SPINDLE MOTOR RATED POWER ( CONTINUOUS RATING) | KW | 3.7KW (FANUC/MITSUBISHI) | |